Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Voltmeter Installation Madness 200

posted by  Ron K on  Sun Oct 2 15:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Folks,

Please help the electrically challenged!

I tried to install a voltmeter today using the original Volvo instructions found here:

http://kotisivu.mtv3.fi/karu244/jannite.html

I wired my gauge just as the instructions indicate. At first I had zero indication on the VM. Hooking up a test meter to the wires showed (negative)-12v. I switched the connector and the VM seemed to work properly. So now the ground indication on the VM is hooked to fuse No.3, and the positive or power is the ground!? In any configuration I am unable to get the light to operate. The meter shows -12v when I test the leads. I do have the ground running between the light and the gauge then on to the chassis ground.

Hating electrons,

Ron






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Voltmeter Installation Madness [200]
posted by  Ron K subscriber  on Sun Oct 2 15:54 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.