Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Harmonic Balancer 200 1986

posted by  someone claiming to be TomM on  Mon Oct 17 09:05 CST 2005 [RELATED]

I'm repairing a broken timing belt and I think the harmonic balancer has spun.

Can anyone verify that a proper 1986 230F NA harmonic balancer (HB) should have the timing mark (on its V-belt pulley) at about 1 o'clock when the notch on the HB for the crank toothed gear is aligned with the raised TDC mark (i.e., under the lower cover, close to vertical)?

Mine is way off, about 7 o'clock position w.r.t. TDC. I read a post that said the pulley's TDC is not aligned with the toothed crank's, but by how much?

Thanks,

TomM






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Harmonic Balancer [200][1986]
posted by  someone claiming to be TomM  on Mon Oct 17 09:05 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.