Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

3 wires from EZ distrib - is one shielded?? No spark 700 1986

posted by  volbro245 on  Mon Oct 17 14:22 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Nov 6 18:05 CST 2013
[RELATED]

I have no spark on my '86 740 T. I am checking the wires from the distributor and when I pulled back the rubber boot, find a bare wire. However, the cable is very stiff. I suspect this may be a shielded cable??? This terminal with bare wire tests continuity to 4 out of 5 terminals at the " power stage module" ???
This seems odd. But with out a diagram???

Coil has 12v and tests out for resistance.

Background- changed my engine harness ( the Fuel injection one) and now have no spark- suspect I bumped or tweaked a wire in the process- I have checked all my other connections several times... car did run... harness looks good sitting still..... HELP.

Mike
--
In Tacoma '86 245 200K+ and '86 740T- 215K+ both with M46






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 3 wires from EZ distrib - is one shielded?? No spark [700][1986]
posted by  volbro245  on Mon Oct 17 14:22 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.