Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2015 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken mirror housing 900 1994

My daughter side-swiped a garbage can today. The garbage can is ok. But the passenger side mirror housing is hanging by a cluster of wires. I'm thinking of a used assembly from http://car-part.com/.

The FAQ on the subject states: Mirror Housing Removal. [Query] The paint on my side view mirrors is starting to chip away so I'm going to paint them the same color as the car I just need to figure out how to take them off first. [Response: Dick] Take door panel off (door panel does not need to be removed if mirror is manual adjust.) Remove triangular portion covering mirror mount if electric and if manual, remove it including flex handle. Unplug cable from mirror if electric. Unscrew 3 8mm (I think) bolts holding mirror. Mirror should be in your hands now.

Can anyone elaborate on this procedure? I don't want to break something, such as the triangular portion covering the mirror mount because I don't understant how it comes off.

Also, does anyone have any additional suggestions for how I should proceed?

As always, thanks for your insights and experience.

Robert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken mirror housing [900][1994]
posted by  rwreagan  on Sun Oct 23 08:54 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.