Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

drain plug fix- Has any body tried this ? 200 1982

posted by  nabramson on  Fri Oct 28 17:37 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 20 15:00 CST 2011
[RELATED]

I have found a possible solution to my stripped oil drain plug hole dilemma. I purchased the next oversize drain plug over the original 3/4 in plug. It is a 20mm or 13/16 in drain plug. I also have the right tap set to re-thread the oil drain hole.My question is has any body seen the inside of the oil pan & is there enough metal material in the drain plug hole that it still will have proper strength when I tighten the new drain plug ?
Hopefully this will spare me the hassle of replacing the oil pan.I can get a good used one ($95)from Hirschindusties (They sell good stuff- bought good used strut housing from them for cheap).






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New drain plug fix- Has any body tried this ? [200][1982]
posted by  nabramson subscriber  on Fri Oct 28 17:37 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.