Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 idles too high 200

posted by  volvosfive on  Fri Nov 11 13:40 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 21 08:01 CST 2011
[RELATED]


My '86 240 idles really high ( around 1500 rpm). It runs fine other than that. The IAC is a known good one. I've cleaned the throttle body, the TPS switch clicks like it should, and the flame trap has been replaced. My engine bay wiring harness has never been replaced, but has had some new wires soldered in. Any idea as to what the problem could be? I don't think that I have any vacuum leaks. A PO had installed a metal hose control valve in place of the IAC. I don't want to put this back on the car however.

Thanks in advance.
Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.