Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing a steering column 200 1980

uid 15053's pic
posted by  Dylan Berichon on  Wed Nov 23 15:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

I've got a new steering column (and steering wheel) to put in my '80 245 DL while I'm doing the heater core this weekend. The old one has been crunched in a bit and needs replacing.

Anyhow, I've got the new steering column ready to drop in. I'm wondering if there are any tips or tricks people might have that could help me with this.

Is there anything special about the bolts that hold the steering wheel locking mechanism to the column, other than the heads? I'm hoping to just put some standard bolts in place.

Anyhow, with the dash removed, I figure that it would be a lot easier to remove and replace the column.

Are there any tricks for keeping things aligned, so that when I put the new column and wheel on, things line up as they did before?

Thanks as always.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.