Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

license plate light question 200 1989

I wonder if anyone can help me troublesoot this problem:

Both license plate lamps on my '89 240 wagon are out ... so today I tried to replace them. I got the lens assemblies off just fine and replaced the bulbs, but .. nothing.

Thinking the fuse might be shot, I replaced, but still nothing. I noticed that the parking lights that are operated by the same fuse as operates the plate lights are running, so the problem shouldn't be fuse related. One thing I did notice is that on the driver's side light assembly, there is a black wire with a crimped connector coming out of the sleeve that feeds the other wires to the lamp assembly that doesn't seem to have anything onto which to connect. COult this be my culprit?

I actually got a fix-it ticket the other day for this very problem and time is running out before i have to go to the police and show them that I fixed the problem. So any help would be greatly appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New license plate light question [200][1989]
posted by  someone claiming to be NRBQfan  on Sun Nov 27 13:58 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.