Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 brake problem 200

posted by  volvosfive on  Mon Nov 28 13:31 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 21 08:01 CST 2011
[RELATED]


After searching the archives I still cannot find a post similar to the problem I'm having with my '86 240. When bleeding the brakes, the pedal won't go to the floor when the upper bleed screws are opened on the front calipers. This happens when either the left or right UPPER bleeders are opened. Fluid does come out though. All other bleed screws being opened result in the pedal dropping to floor normally. The MC, rubber hoses, pads, rotors, and front calipers are new. The brake pedal also feels fine after bleeding.

Thanks in advance.

Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 brake problem [200]
posted by  volvosfive subscriber  on Mon Nov 28 13:31 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.