Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tail Light Lense Woes 200

posted by  VanCityBoy on  Mon Dec 12 07:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I finally got my tail light circuit board from Volvo World to do a much needed replacement for the drivers side. I did this recently with the passenger side and had much success. Aside from the usual woes of trying to get the damn sockets to fit right, I noticed another problem I didn't encounter while doing the passenger side. I have the rear fog option, and it works in my 244, but the lense on the driver's side DOESN'T have the socket area punched out so I can even put a socket inside it. No wonder the fog doesn't work on that side. I can see an outline in the plastic where the socket area is SUPPOSED to be, but looks like now I'm forced to custom make that.

Has anyone had a similar problem? I'm not sure what to do this with. A Dremel?

Any help/thoughts/input would be greatly appreciated.

-Todd
--
'85 240 GL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tail Light Lense Woes [200]
posted by  VanCityBoy  on Mon Dec 12 07:51 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.