Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Noisy belts/pulleys-new accessory bushings? 200

posted by  someone claiming to be texmark on  Tue Dec 20 06:36 CST 2005 [RELATED]

89 240 sedan, non-turbo, 162K

I get a lot of either belt or pulley noise, seems to come from near the water pump pulley. Loudest with cold engine, then quiets some as engine warms. I can see that the alternator pulley is slightly behind the plane of the water pump pulley, so no surprise why there is noise. A couple of years back, I replaced the alternator accessory bushings with yellow poly bushings from FCP, but as soon as I re-attached the belt to the alternator and tensioned it, I could see the alternator twist slightly. I've seen a few posts about the accessory bushings that IPD sells, and I'm wondering if it's time to give them a try.?

Also, shouldn't the alternator pulley line up in the same plane as the water pump pulley?

Thanks,
Mark






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Noisy belts/pulleys-new accessory bushings? [200]
posted by  someone claiming to be texmark  on Tue Dec 20 06:36 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.