Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear wiper linkage and motor 900 1994

Great forum. Used numerous links to get to my rear wiper motor.
I thought it was burned out(rear motor) but after taking the nut off the motor and removing the linkage arm, the motor turned. Sounded normal. I then tried it with the arm back on and no movement...not even a sound. Fuse is still good. The linkage arm rotating points are lubricated..but linkage arm seems to hit the attached wiper mount as the arm goes through its revolution. Very perplexing. When everything is connected, the arm doesn't seem to have enough free movement to get through one revolution of the motor.
Don't know if the motor has enough juice and/or if the problem is the arm.
Any ideas? Thanks.

Jerry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear wiper linkage and motor [900][1994]
posted by  Jero  on Thu Dec 29 07:28 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.