Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to wire up an oil pressure sender?? 200

posted by  raidman on  Thu Jan 12 14:42 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Am trying to install an oil pressure sending unit onto the engine block and the guage on the dash. I will replace the small clock on the side of the instrument panel with the guage.

the sending unit has 2 connections marked "G" and "WK". Small spade to the "G" and large spade to the "WK".

Does "G" mean 'green' or 'ground'? The guage has a green wire that is supposed to be connected to the sending unit, I know that from the markings that the supplier had on it.

Anybody done this before?

Gracias,
el raidman





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to wire up an oil pressure sender?? [200]
posted by  raidman  on Thu Jan 12 14:42 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.