Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Temperature Sender- Is it only for the gauge? Is there another port? 200 1990

posted by  ricefive on  Fri Jan 20 08:24 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Nov 29 07:33 CST 2010
[RELATED]

Does the temperature sender under the intake manifold only send a signal to the gauge or does the ECU use the signal? I am putting in a water temp gauge and contrary to the advice of the guy at "egauges" you cannot sp;lit the signal from that wire for both the stock temp gauge and a real one so I was just going to unplug the stock gauge.

Is there another port that I could install a VDO sender in. I really rather not put one in the radiator hose. Thanks for your help.
--
1990 240- 270K- Original Owner-M-47, VX cam, bilstiens, spt exh, euro lamps-turbo whls,- still slow but handles well- Near Houston- also 2004 XC90 T5 AWD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temperature Sender- Is it only for the gauge? Is there another port? [200][1990]
posted by  ricefive subscriber  on Fri Jan 20 08:24 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.