Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

86 B230F Crank Position Sensor? 200 1986

posted by  Big Harry on  Sat Jan 21 15:07 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 11:06 CST 2014
[RELATED]

I pulled the engine out of my 86 244 to swap into the 88 765 and noticed when I pulled the flywheel off that there was no Crank Sensor. This engine has the side mount distributor and no indication of where the timing input would come from. It may not be unusual to someone in the know, but I had always thought that if it did not have a Hall effect distributor then there was a crank sensor involved. I'm just curious since it is not going to be used in this configuration in the 765.

Regards,

--
Will Dallas, www.willdallas.us, www.willdallas.org, www.willdallas.com 86 245 DL 222K miles, 93 940 260K miles, 88 765 GLE 152K miles, 86 244 DL 200K Miles







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 86 B230F Crank Position Sensor? [200][1986]
posted by  Big Harry  on Sat Jan 21 15:07 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.