Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

instument cluster - I tried, but fried 200 1988

posted by  flood on  Wed Jan 25 07:23 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:07 CST 2014
[RELATED]

Well, odometer went out, so I thought that I would replace the gear and do the temp. compensation board fix at the same time. Soldered a jumper wire to terminals 1 and 3, and reinstalled the unit (with the new gear) and went from the anticipation of triuphant success to the sober realization of abismal failure when nothing but the overdrive arrow worked! No temp, no gas guage, no speedo. Question--is this dead? and if so, any tips on getting a junk yard odometer to match my current milage, or should I just leave it. (I will be able to salvage my new gear at least.
P.S. I have taken it out and rechecked everything a couple times allready.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New instument cluster - I tried, but fried [200][1988]
posted by  flood subscriber  on Wed Jan 25 07:23 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.