Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Speedometer Calibration 700 1990

posted by  shiggins on  Wed Jan 25 13:31 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello all,
I have my dash apart and have been researching calibrating my speedometer all day. I saw a great post in the FAQ about changing out a resistor to account for the innacurate reading but 1) the picture is very blurry and 2) I think my speedometer is different.
I put a 4.10 rear end on the car and the speedometer funtions but reads too little by a factor of ~3.6
The chip on my board says BA6140A. I believe this is manufactured by a company called ROHM but I cannot find any documentation on my chip to figure out exactly which resistor to change.
I'm about to give up on this project and call it a wasted day unless anyone can give me any advice. I just don't want to start ripping resistors off this board when I really have no idea which one does what.

Thanks in advance
Sean





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedometer Calibration [700][1990]
posted by  shiggins  on Wed Jan 25 13:31 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.