Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fuel pump to filter hose question 200 1983

posted by  volvoasaurus on  Tue Jan 31 04:31 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 8 10:16 CST 2013
[RELATED]

My fuel pump / fuel filter assembly has a piece of rubber hose that goes from the pump, makes a 90 degree turn then goes onto the fitting for the fuel filter.
This hose failed on me yesterday causing me to lose all 15 gallons of gas and have to walk 2 miles home. I fixed it this morning (with another piece of fuel hose) but wondered if there is is something missing. I think the hose failed due to the high pressure fuel hitting the bend in the hose. Is there supposed to be a 90 degree fitting on the nipple coming out of the fuel pump? It has threads on it; if so what size 90 do I need.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New fuel pump to filter hose question [200][1983]
posted by  volvoasaurus  on Tue Jan 31 04:31 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.