Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rubber Molding Problem 200 1986

posted by  ToughGuy on  Wed Feb 1 07:45 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 20 11:56 CST 2008
[RELATED]

Ok so this is not a critical problem but none-the-less it seams to be a common one. The lower rubber molding on my passenger door keeps coming loose and hangs off the door dragging on the road hitting passing dogs etc. I've glued it back on several times but it always seams to come loose. Is there a trick to attaching it correctly? A certain kind of adhesive I should use? I don't want to just pull it off so as always any help with this would be appreciated.

Thanks
Scott
86 240 Wagon
156K and going.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.