Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

OD relay isn't where it should be. 200 1979

posted by  someone claiming to be Jerry on  Thu Feb 9 12:35 CST 2006 [RELATED]

The other day my OD slipped out when I was going about 55 mph. I almost didn't notice it. I went to check out the relay and it wasn't there! I have been doing a lot of work with and around the glovebox (power windows, locks, speakers, 5v power supply) and while I wasn't looking for the relay I never really noticed it. I figured that while running some other wires I could have damaged it perhaps.
The PO said when he bought the car the OD wouldn't engage so he "fixed it". The indicator light never worked but it was going in and out of OD. PO was an auto electrician. He made mention of turning his other brick into a 9 speed with OD working in all gears minus reverse. Is there some chance he bypassed the relay? What would I look for if this is the case?
So where would you start? I've already checked the switch on the gear shift.
thanks
Jerry






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OD relay isn't where it should be. [200][1979]
posted by  someone claiming to be Jerry  on Thu Feb 9 12:35 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.