Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tranny Cooler Line Repair 200 1993

posted by  Oleseahorse on  Tue Feb 21 10:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

Hello All,

Having done a tranny cooler line repair once on the 90 244, since gone, I unfortunately have to do it again cause the line on the 93 has sprung that typical pinhole leak at the double bracket.

The question I have is how do I keep the mess down. The last time I used a hacksaw to cut the culprit section out. This time, I will purchase a mini tubing cutter so as to hopefully remove the offending section quicker, but I'd like to reduce the volume of fluid dripping all over me.

BTW, I wrapped both cooler lines with a few turns of electrical tape about 2 years ago (before any leaking) but the vibration still managed to cause a leak.

Got any ideas? Thanks in advance as you guys are always very helpful.

Marty Wolfson
--
93 244 193K, 93 244 116K, 93 245 118K (in California now), 99 V-70 91K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tranny Cooler Line Repair [200][1993]
posted by  Oleseahorse subscriber  on Tue Feb 21 10:56 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.