Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Quick Tach Test Procedure 200

posted by  yellowbrickroadster on  Wed Mar 8 09:13 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 06:18 CST 2014
[RELATED]

Hi Guys,

I have a few tachs I have pulled from junker 240's and want to test them to see which ones work and which should be pitched. I am looking for a quick way to hook them up to the engine without pulling the instrument cluster. What do I hook up from the back of the tach to where under the hood ? I assume there is a lead that will come from the coil to the terminal on the back of the tach that the red/white wire from the cluster normally goes to. There also seems like there should be 12v power, but how should I connect this ? Please be simple and specific as I am not good with electricity, and in general equate it with witchcraft. Thanks.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Quick Tach Test Procedure [200]
posted by  yellowbrickroadster  on Wed Mar 8 09:13 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.