Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT Engine seal removal tips wanted 700 1991

posted by  Allanwayne on  Tue Apr 11 05:11 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 8 15:05 CST 2012
[RELATED]

Howdy,
I'll be replacing the crank, cam and intermediate seals this weekend. The FAQs discuss seal removal tools, which I have bought a generic one from a parts store. When I last looked at these during the timing belt change, there seemed very little room to squeeze the hook end of the removal tool around the outer edge of the seal without scraping the metal it is seated in.

Is there a particular volvo tool I should order to avoid damaging anything, or do the generic ones fit?

Do I need separate tools for the larger crank seal and the two smaller ones?
Any removal tips not covered in the FAQ?

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230FT Engine seal removal tips wanted [700][1991]
posted by  Allanwayne  on Tue Apr 11 05:11 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.