Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

recycling a drive train 700 1986

Sadly, I must pull my first Volvo off the road.@ 260k miles, still runs tight, but rust has taken hold.Frame rails under seats and behind rear wheels.I would gladly pull the drive train before the rest goes to the crusher. Question is, can I convert this motor to a carburated unit,without any computer sensors?I'm thinking about a home built tractor.If I built a adapter for where the throttle body goes, I'd bolt a carb on.Is there anything I should re-think? Any suggestions for the carb I should use? Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New recycling a drive train [700][1986]
posted by  MyTSwen  on Sat Apr 15 04:50 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.