Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 expansion valve, oil leak 200 1989

posted by  greg_mustang on  Wed Apr 19 06:19 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 10 07:26 CST 2014
[RELATED]

Hi All,

For those well experienced in A/C on the 240:

About three years ago I converted my system to r134. replaced expansion valve, receiver dryer, drained oil in compressor and replaced with ester oil, I also replaced the high pressure hose from condensor to compressor which was leaking. Anyhow the system ran fine for about two years. Last year the pressure dropped a bit, I topped it off, and also added an electric pusher fan, which helped performance in traffic.
This year the pressure is a bit low again, now doing the carpet I find that oil was leaking at the expansion valve area (accumulating where the tube bends down like a trap) and it had formed a nice oil stain going down into the carpet.

I was wondering if anyone ever had a leak there.... yes when I replaced everything, all new o-rings too.

Thanks,
Greg
Montreal, Canada





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 expansion valve, oil leak [200][1989]
posted by  greg_mustang  on Wed Apr 19 06:19 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.