Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

87 bumper on 84 200

posted by  O'Bryan on  Mon May 8 05:26 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 28 13:52 CST 2013
[RELATED]

I bought a 1984 242 DL that had been in a collision and the bumper had been replaced with an earlier aluminum bumper. I have been looking for an 84 bumper for a while in the Pick and Pull and finally found a 1987 DL. I pulled the bumper, shocks and everything. I noticed that the 87 had a fender brace hole and also an adjustment slot in the fender. My 84 doesn't have the adjusting slot. When I mounted the bumper it is not parallel but points slightly up towards the front of the car. Do I need to create my own adjusting slot in the fender? Any information would be helpful.
Thanks
Steve O'Bryan
Chico CA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 87 bumper on 84 [200]
posted by  O'Bryan  on Mon May 8 05:26 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.