Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

changing o-rings under trans cooling line fittings AW-70 200 1992

posted by  Herb Goltz on  Wed May 17 02:59 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

Hello All:

In a previous post I was informed that the 90 deg fittings between the trans and the cooler lines are sealed with an o-ring. It looks like I have leaks at both the in and out fittings.

Do I need to remove the lines from the fittings to swap out the o-rings, or can I turn the nut on the fitting without removing the cooler lines first? Mine are a little crusty looking, so if I can avoid messing with them, I would prefer it!

I have to find some time to swing by the dealer to get the o-rings-- I am hoping to do the job this weekend...

Thanks!

--
Herb Goltz, Aurora, Ontario, Canada '92 245 w/130K mi, '92 945T w/200K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New changing o-rings under trans cooling line fittings AW-70 [200][1992]
posted by  Herb Goltz  on Wed May 17 02:59 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.