Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

York Compressor Wiring 200

posted by  Brickish on  Thu Jul 6 05:55 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 20 13:52 CST 2011
[RELATED]

Hey All,

I just bought a 1984 245 wagon, and I'm trying to trouble shoot the a/c system because the compressor won't engage.

It has the York Compressor, with the fill ports facing the front of the car through the belt.

I jumpered the low pressure switch wire together while the car was running and there was no response from the clutch. Upon further inspection, the ground wire (blue in my case) was attached to the upper bolt on the york compressor and seemed ok, but I noticed there was another wire clip on the lower bolt of the compressor which was severed and missing.

Does anyone know the proper wiring for the york compressor. The ground looks ok, but was my clutch wire perhaps ripped out??

Pictures or diagrams are a wonderful thing for me!

Thanks in advance for your help,
-Brickish





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New York Compressor Wiring [200]
posted by  Brickish  on Thu Jul 6 05:55 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.