Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Drain Line...Driving Me Nuts 700 1989

posted by  jtarlen on  Fri Jul 21 06:32 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just finished puling the turbo out and exhaust manifold to replace the gaskets. Everything seems to be great except I can't get the oil drain line to stop leaking where it returns to the engine. I replaced the O ring and did everything I could to line it up right before I reassembled everything. But, it leaks none the less. Now with the turbo back in place, I realise it is going to be hell to unbolt the drain line from the bottom of the turbo (with long skinny arms and a 4' long allen key) and try again. Is there any type of sealer or caulking I can add to that connection to help seal it?

Thanks,

Jonas.
89 740 turbo wagon 230k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Drain Line...Driving Me Nuts [700][1989]
posted by  jtarlen  on Fri Jul 21 06:32 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.