Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temperature Board By-pass Kit by iPd 200 1989

posted by  ugly duckling on  Mon Jul 31 05:15 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 22 21:56 CST 2013
[RELATED]

My temp guage has never read accurately, and I'm sure it's due to the temp. compensation board. Since my odometer broke and I will have to remove the instrument cluster to get at it, I figured I should take care of this TC board thing. Browsing through the archives I came upon some good write-ups and pics of removing the TC board and soldering a wire from pin 1 to pin 3. IPd sells a little U-shaped thing that appears to just plug into the pins without the need to solder for a fairly decent price.

Now my question is since removing the TC board is endorsed by iPd and some very knowledgeable brickboarders, does this mean the TC board is not necessary? Connecting pin 1 to pin 3 will cause the temp. guage to function the way it would if a TC board were there?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temperature Board By-pass Kit by iPd [200][1989]
posted by  ugly duckling  on Mon Jul 31 05:15 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.