Hey everyone,

For a while now I've been selling some custom made 1" aluminum wheel spacers for the 14X, 24X, 7XX, and 9XX Volvos on eBay. Here's a link to an auction ad if you want to see what I mean:

http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=290012304124&sspagename=ADME:B:AAQ:CA:1

A few people have e-mailed me and asked if I have any spacers for the 1800s and 122s. So far I haven't made them but it got me wondering how much interest there would be in them if I were to have some specially made. I don't know exactly what the cost would be - it would depend a lot on how much interest there was and how many I get made - but for now let's assume somewhere around $140 - $150 USD for a pair. It could be a bit more or a bit less but I'm not sure. I'm thinking about having them made 1 inch (25 mm) thick.

Anyhoo, would any of you want to get a pair or a full set of them to fit an 1800/122 if I went and had some made ? Please e-mail me off list at rojSPAM_OUT@telus.net (remove the SPAM_OUT part to e-mail me) and let me know.

Also please tell me what bolt and hole pattern you'd want. There are a few options:

For Amazons and 1800s up to and including 1969:

5 x 4.5" holes and 5 x 4.5" studs - Maintains old style standard bolt pattern. You can use the same wheels you're using now with these ones.

5 x 4.5" holes and 5 x 108 mm studs - Converts old bolt pattern to newer Volvo bolt pattern used on 1800E/ES, 200, 700, 900 and most FWD Volvos.


Thanks,

Roj (Roger)