Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clutch bleeding problem 700 1991

posted by  Allanwayne on  Wed Aug 2 15:01 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 8 15:05 CST 2012
[RELATED]

After replacing the clutch line and slave cylinder, I am trying to bleed the clutch. There is no resistance in the clutch pedal, goes right to the floor and it seems that no fluid is being pumped from the reservoir.

I have the bleeder valve slightly open but it doesn't seem to matter how much it's open or closed? The fluid is topped up and the cap is on the reservoir, end of clear bleeder hose immersed in a bit of fluid.



I am missing something? or has the master clutch cylinder suddenly stopped working?? or does it have to be primed in some way to start pumping?

Ideas?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clutch bleeding problem [700][1991]
posted by  Allanwayne  on Wed Aug 2 15:01 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.