Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1995 960 AC Compressor - Wire frayed, possible to fix? 900

Hello forum,
My AC compressor died, so I got a new one from a junkyard. After removing the old one and putting the new one in, I noticed that a wire had frayed and bent from the new compressor and was no longer attached. I'm not sure what wire it is, exactly. I called Volvo to see if they had a replacement wire, but they said that it only comes with the entire solenoid, which costs $140 (as much as the used compressor).

The wire that needs to be repaired is one of two that is attached to the nut that screws directly into the compressor on the right hand side. Can I just solder and liquid duct tape it back into place? If I attempt this and screw it up will it harm the compressor (and worse, void the warranty?) I would return the compressor, but it was such a pain to get that thing in there. I'd love to just fix the wire.

Thank you in advance!

Kip






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1995 960 AC Compressor - Wire frayed, possible to fix? [900]
posted by  someone claiming to be kbodi  on Mon Aug 14 09:28 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.