Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What's the first thing to go on the steering? 200 1990

posted by  VolVolina on  Fri Aug 18 07:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I've done, brakes (MC, junction box, rotors, calipers), suspension (shocks, struts, bushings, tie rods, ball joints, etc), fuel(pump, 02 sensor, FPR, etc.) I've taken care of the driveshaft (rubber grommet, U-joints), lots of other stuff, but I've never done anything to the steering except for inner and outer tie rods. I'm getting worried that since that's the only major system I haven't worked on I'm due for a problem. What should I look for? What parts on the steering are first to go. Thank you all.

Still got her going at $165,000. Albeit with the CE light on for the past 15,000 or so.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What's the first thing to go on the steering? [200][1990]
posted by  VolVolina subscriber  on Fri Aug 18 07:56 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.