Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replaced the flame trap.....now on to cleaning the Idle Control Valve and replacing the ground wires 200

posted by  1sciroccofahrer on  Tue Aug 29 16:02 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Mar 8 19:17 CST 2014
[RELATED]

Could someone recommend to me how best to get the two hoses off the IAC? I don't want to destroy them (being the hoses), but need to get them off so I can take the IAC to the shop and clean it out.

When I was replacing the flame trap this evening I noticed that the ground wire from the firewall to the valve cover was looking rather shabby. I want to replace it, and figured I should replace the other grounds as well. If someone could point me in the right direction in this regard it would be most appreciated.

Thank you one and all for the help in getting my sister's car working properly. Have a most splendid evening :)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replaced the flame trap.....now on to cleaning the Idle Control Valve and replacing the ground wires [200]
posted by  1sciroccofahrer  on Tue Aug 29 16:02 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.