Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Where is the Timing Mark on the Crankashft ? 700 1986

posted by  NavalGunner1125 on  Sat Sep 9 13:21 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 19 15:30 CST 2014
[RELATED]

Brickboard Homies,

I am trying line up the Timing Belt on my '86 B230FT. I pulled off the top half of the Timing Belt cover and cranked the Engine Clockwise to where the camshaft dimple is lined up perfectly with the Notch in the rear part of the top half of the Timing Belt cover.

I want to know what I can use to check the alignment of the Crank without having to pull off the cowling, the fan, the hoses & belts, etc....

Is there a way to line up the crank without having to pull off all of the fan and stuff ?

I can 2 "0" marks on the timing belt cover and CLEARLY can see the notch on the harmonic balancer. What do I use to make sure the crank is where it is supposed to be (#1 at TDC) while the cam is resting at its' correct position ?

I figured someone on here would know the answer to this.

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Where is the Timing Mark on the Crankashft ? [700][1986]
posted by  NavalGunner1125  on Sat Sep 9 13:21 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.