Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Winterizing the ignition on my 93 240 200

posted by  invisible_ink on  Sun Sep 10 14:55 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,

My 93 240 is a bear to start in the cold (engine floods). To try and prevent this, I've replaced the coolant temp sensor and will be replacing the fuel pressure regulator. To further cover my bases (who wants to be doing this in the cold) I thought that I would try to amp up the ignition. I was thinking about the possibility of dropping in a DSM-6A 6200 with a heavy duty coil. Anyone have a setup that they like? Different specs? Any pitfalls to be aware of?

Thanks,
ink.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Winterizing the ignition on my 93 240 [200]
posted by  invisible_ink  on Sun Sep 10 14:55 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.