Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

its time for some work! 200

posted by  someone claiming to be the volvo on  Wed Sep 27 02:07 CST 2006 [RELATED]

Re my 1981 242.

I have a K-cam on the way and I plan to do some work on the car. Let's make sure I got this right.

My plan is to:
1. Install the cam and change the timing belt and tensioner while I'm at it. I'm also getting an adjustable cam sprocket.

2. Replace the water pump as a preventative measure.

3. Flame trap maintenance.

4. Check dizzy, timing, etc.


My concern... should I get the valves adjusted? From the looks of that shim kit in iPd's catalog it looks very complicated. On my BMW 2002 I was able to adjust valves in 15 minutes using a feeler gauge and wrenches.

I don't know the entire maintenance history of this car so I want to play it safe. She has been good to me in the 1+ year I've had her.

Also if there's anything else I'm missing please let me know. I want to cover all the bases.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New its time for some work! [200]
posted by  someone claiming to be the volvo  on Wed Sep 27 02:07 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.