Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

95 940 help with in-tank fuel pump removal 900

posted last week about failing/failed in-tank fuel pump, Spook and Chris Mullet provided valuable info. Turns out, there is only ONE fuel pump on 95 940s, and it is in the tank.

Rec'd new Bosch in-tank pump from FCP Groton. Now accessing fuel tank to replace pump by removing the large (approx 10") black plastic threaded cover/cap. Hoses connected to the black cover/cap with clamps are fairly easy to remove. But, one hose, (the pump outlet?) is connected to a hard plastic fitting that supposedly houses some type of quick disconnect. How do I remove it? Or, should I remove the hose from the barbed end of the fitting? Thanks for any suggestions or advice.








THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 95 940 help with in-tank fuel pump removal [900]
posted by  someone claiming to be miracleman49  on Wed Sep 27 10:44 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.