Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I may hate my head gasket! Help! 200 1991

posted by  DHartlein on  Tue Oct 31 13:37 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 20:00 CST 2014
[RELATED]

Just changed the head gasket in my 91 240. Boogered up a gasket from FCP Groton, and was forced to get one at NAPA in the interest of time. There was a difference. And yes, you can put a head gasket in wrong if you are dumb enough to flip it end to end!

Worked on it over a 3 day period, started it up, and saw coolant near the gasket seam near the #2 cylinder on the driver's side. Just a thin line of green, right at the gasket edge, an inch or so long. Didn't even drip on the block or anything. It leaked before, but at the front corner passenger side.

I am very hopeful one of you guys can tell me not to worry about it - that the gasket expands. Or it will all settle in. Or the green I saw wasn't coolant, but alien slime of some sort. It's a communist plot. A hallucination.

Help! (And thanks. If it isn't "normal", our 240 may be on the way to a real mechanic next. I am fried!)

Dave
91 240 Original Owner






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I may hate my head gasket! Help! [200][1991]
posted by  DHartlein  on Tue Oct 31 13:37 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.