Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing AT filler tube fitting 200 1987

posted by  teedubb on  Sat Nov 4 09:55 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 10 14:40 CST 2007
[RELATED]

I figure I'd better ask before I break something. I'm having a REALLY hard time breaking loose the AT (AW70) filler tube fitting so I can replace the pan gasket on this '87 240. Granted, I don't have a 15/16" flare nut wrench to fit it better, but it's not budging for nuttin'. My question is: Is it by any chance reverse threaded? I tried moving it in both directions, more so in the lefty-loosey, but had no movement to the righty-tighty either. Could be somebody's prior thread lock, who knows. Any suggestions are all welcome. Thanks in advance.

tw






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing AT filler tube fitting [200][1987]
posted by  teedubb  on Sat Nov 4 09:55 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.