Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

crank position sensor 1992 740 700

posted by  Todd804 on  Wed Nov 15 02:05 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Feb 21 16:11 CST 2011
[RELATED]

After doing some more reading to help with my suspected fuel pump relay, I came across some diagnostics for the crank position sensor. Sure enough, the insulation was frayed in two spots. I checked the resistance between the center lug and one of the other lugs and got 160 ohms. I got zip between the center lug and the other lug. I got no continuity anywhere at the firewall junction. Does this sound like a bad CPS or just a poor job of diagnosing this component?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New crank position sensor 1992 740 [700]
posted by  Todd804 subscriber  on Wed Nov 15 02:05 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.