Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

144S brake question 140-160

posted by  cef2lion on  Mon Dec 18 09:19 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 9 05:17 CST 2014
[RELATED]

I have a 1968 144 that needs front G calipers. One seems original with broken off bleeder screws. Cups look iffy so I might just replace the caliper. Looks to be a pain to get the bleeders out. The other caliper doesn't seem all that bad. Might have been replaced before. All bleeders ok on that one. Cups look really clean as well.

On the bleeding process the Haynes manual say to remove switch element from brake warning valve. I found that. Does fluid come out when you remove it? I also noticed no wire attached to element. Anyone know where that wire comes from so I can see if I can find it. No wiring diagram in Haynes manual. Recall seeing one in owners manual. Guess I can check there.

Craig






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 144S brake question [140-160]
posted by  cef2lion  on Mon Dec 18 09:19 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.