Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removal of heater core hoses into temp assembly? w/pic 200 1991

posted by  Oliver240 on  Mon Jan 8 12:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jun 16 20:00 CST 2012
[RELATED]

First of all, thankyou to everyone whose responded to my posts on the heater core subject, i appreciate your time and patience. I've recently snipped the two wires i was recently posting about(from heater unit to fan control), but now i'm having some trouble removing hoses. I'm having trouble with the intake? hose that goes into the temp control assembly. This is the hose on the bottom right of the drivers side that comes from the engine? and goes into that little temp asembly.
I guess you don't have to know where it is, but i'm wondering if i should move around the heater unit to get better access, or if i just need to muscle it out of there? Any tricks, ideas?
thanks cp

ps The picture is 5/14 on the heatercore1 album.
http://picasaweb.google.com/cpayne33

thanks again






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removal of heater core hoses into temp assembly? w/pic [200][1991]
posted by  Oliver240  on Mon Jan 8 12:23 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.