Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Intake Manifold to Valve Cover hose 200 1979

posted by  tjodoin on  Tue Jan 16 09:14 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 25 08:23 CST 2008
[RELATED]

1979 242 DL Lamda Sond, B21F engine, 4 spd manual.

I've got a busted plastic nipple connection on the hose from the intake manifold to the valve cover. The big plastic "T" has a plastic nipple that broke off inside the hose. This "T" junction accepts a big hose from the air filter and continues to the valve cover.

What is the purpose of this "T" connection and associated hoses? I notice that the idle is much higher when this hose from the intake manifold to the "T" junction is not connected.

Any ideas what this is called and where I might find a replacement?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intake Manifold to Valve Cover hose [200][1979]
posted by  tjodoin  on Tue Jan 16 09:14 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.