Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Beltline side trim reinstall 200

posted by  Mark's 240 on  Tue Jan 16 15:17 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 19 07:44 CST 2014
[RELATED]

Hello,
My '93 was on the losing end of a battle with a tree in someone's front yard one rainy night last week.

I replaced the driver's side front fender,headlight and hood with parts taken from my parts car. Both cars are white and the job came out pretty good after 12 hrs of work. My question has to do with putting the rubber / stainless beltline trim strip back on the fender. Two of the plastic retainer clips were broken in the crash. I have the all black strip from the '92 donor car and would like to remove two clips from that strip, put them on the '93 strip for re-installation.

How does one get those clips out of these strips? I've tried gently prying every way possible, even under a magnifying glass but can't get them out. Any ideas?

Thanks,

Mark
--
' 93 240 (Quinn), AW70, 117K. '90 240 (Amanual), M47II, 89K. '92 240 (Edgar), AW70, 170K, totalled parts car. Love to drive them when my kids let me!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Beltline side trim reinstall [200]
posted by  Mark's 240  on Tue Jan 16 15:17 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.