|
My daughters 1992 740 ABS light started flickering and then remaining on. This happens most of the time the car is started, but not everytime.
I check the surge protector fuse, OK, and the voltages on the relay pins, also OK.
The diagnostics code readout shows nothing.
I have a chiltons book for 1990-1993 and it has a section on measuring various resistences and voltages on the abs control unit. However, the procedure says, for example, to test for ground between 10, 20, 32, and 34. I'm having a hard time doing this since the pins on my ABS CU cable only go up to 28.
Any suggestions? What's going on here?
greg
|