Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Moving a Draw-Tite hitch from a 1980 to a 1992 200

posted by  someone claiming to be Bond. James Bond. on  Sat Jan 27 09:44 CST 2007 [RELATED]

Greetings--

Maybe it's time for my backup car to take its last ride.

It's got a Draw-Tite hitch that uses the bumper bolts (you just substitute longer bolts to grip both the hitch and the bumper mounts).

I would like to move this hitch to the 1992. Buuuut...the newer cars have the lighter-duty bumpers and they have smaller gauge bolts. The question is--will that hitch from the early model fit on the late model, AND would the flimsier bolts carry the load?

In a related story, my newer car has been hit from behind at least twice. The interior structure has slight damage at one of the bolt mounts with a welded patch over a tear in the sheet metal.

Thanks for any help you can give.

Doug Harvey






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Moving a Draw-Tite hitch from a 1980 to a 1992 [200]
posted by  someone claiming to be Bond. James Bond.  on Sat Jan 27 09:44 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.