Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

New 240 Front Strut Mounts Failing Rapidly, Why? 200 1993

posted by  jthorner on  Sat Feb 3 05:27 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 4 04:02 CST 2010
[RELATED]

About 5,000 miles ago I replaced the front struts and strut mounts. I used a replacement boot/shield kit from KYB as well as KYB strut inserts. The mounts were aftermarket, the brand for which I now forget.

Now I see the rubber cracking and failing when viewed from the top of the mount. It looks as if the bearing is going to blow right out through the rubber at some point soon.

I'm wondering if somehow I left off a critical part in the assembly or if this is just another case of aftermarket rubber parts being ****.

Your advice is appreciated!

John





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New New 240 Front Strut Mounts Failing Rapidly, Why? [200][1993]
posted by  jthorner  on Sat Feb 3 05:27 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.