Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volt gauge and fuses 200 1984

posted by  LeChuck on  Sun Feb 18 13:04 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Nov 27 10:21 CST 2013
[RELATED]

Hello,

Today I wired in a volt gauge, and tried to connect it to fuse 14, as it seems to be the one to use for the accessories. The issue is that it looks like that fuse isn't connected to the battery and has no power. The only other place I found was on an available connector on fuse 12. All the other available spades provided constant power so the volt gauge was always on. It seems to work alright on fuse 12 (is that an ok location?). The problem is I intended to use that available connector for the power window relay as I will be installing power windows soon.

What do you guys think would be the best solution to this? Can I splice the power window relay and the volt gauge on that same connector? Do I need to find another one for the volt gauge?

Currently in accessory position my volt gauge shows about 12, then after starting the car it jumps to about 14, if the gauge is linear...

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Volt gauge and fuses [200][1984]
posted by  LeChuck  on Sun Feb 18 13:04 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.